Molecularily Oriented Polyvinyl Chloride (PVC-O) 45 MPa vs Ductile Iron (DI) Pipe Systems


Below ground pressure transportation of drinking water over a distance of 100 meters from the exit of the water plant to the water meter in a building.


  • Diameter: DN/OD 110 mm

  • Length 100 m            

  • PVC-O; MRS 45 MPa    

  • SDR 65                  

  • Pressure class: PN 10

  • Wall thickness 1,8 mm

  • Fittings PVC-U (EN ISO 1452)

  • Ductile Iron socketed

  • Flow 0,5-2,0 m/s

  • ISO 16422 / EN 805

Service lifetime: 100 years

Please click here to download the full report

 • Comparison studies are provided for information purposes only. The environmental impact analysis for alternative pipe materials has been calculated based on the same functional unit and category rules as used for the plastic pipe system to which it is compared. The analysis of the environmental impact of the comparison material has been based on publically available data

• It should be noted that data relating to raw materials, manufacturing processes, system design, installation practice, etc. for alternative pipe materials has been taken from various publically accessible sources. Whereas every effort has been made to ensure the integrity and validity of this data TEPPFA cannot accept any responsibility for any inaccuracies or omissions.

• As TEPPFA has made the results of the LCA comparison studies available for the general public, following the principles of EN 15804, ISO 14040 and ISO 14044, a critical review of the LCA study is required. Different to ISO requirements for comparative LCA studies TEPPFA did not install a review panel, but commissioned a single critical review. This critical review was performed by Denkstatt GmbH.