Unplasticised Polyvinyl Chloride (PVC – U) Pipe Systems vs Ductile Iron (DI)
Below ground pressure transportation of drinking water over a distance of 100 meters from the exit of the water plant to the water meter in a building.
Diameter: DN/OD 110 mm
Length 100 m
PVC-U; MRS 25MPa
Pressure class: PN 10
Wall thickness 4,2 mm
Fittings PVC-U and Ductile
Flow 0,5-2,0 m/s
EN ISO 1452 / EN 805
Service lifetime: 100 years
• Comparison studies are provided for information purposes only. The environmental impact analysis for alternative pipe materials has been calculated based on the same functional unit and category rules as used for the plastic pipe system to which it is compared. The analysis of the environmental impact of the comparison material has been based on publically available data
• It should be noted that data relating to raw materials, manufacturing processes, system design, installation practice, etc. for alternative pipe materials has been taken from various publically accessible sources. Whereas every effort has been made to ensure the integrity and validity of this data TEPPFA cannot accept any responsibility for any inaccuracies or omissions.
• As TEPPFA has made the results of the LCA comparison studies available for the general public, following the principles of EN 15804, ISO 14040 and ISO 14044, a critical review of the LCA study is required. Different to ISO requirements for comparative LCA studies TEPPFA did not install a review panel, but commissioned a single critical review. This critical review was performed by Denkstatt GmbH.