Life Cycle Assessment

PVC-U vs Titan Zinc Rain Gutter Systems


For the purposes of a direct fair comparison between alternative materials the following identical functional units were used in the LCA study for the rain gutter pipe systems:



  • The collection and gravity withdrawal of rainwater from a typical gable roof (two sided with 0,3 m eaves) of a two storey 100 m2 family house (2 X 5m X 10m) by a half-round gutter system

Pipes & Fittings

  • Gutter system of an average 120 mm opening with two diameter 80 mm downpipes (one per side)


  • A 50 year lifetime has been assumed, aligned with the life time of the building until its first refurbishment

Pipes System Design

  • EN 12056

* Comparison studies are provided for information purposes only. The environmental impact analysis for alternative pipe materials has been calculated based on the same functional unit and category rules as used for the plastic pipe system to which it is compared. The analysis of the environmental impact of the comparison material has been based on publically available data

It should be noted that data relating to raw materials, manufacturing processes, system design, installation practice, etc. for alternative pipe materials has been taken from various publically accessible sources. Whereas every effort has been made to ensure the integrity and validity of this data TEPPFA cannot accept any responsibility for any inaccuracies or omissions.

As TEPPFA has made the results of the LCA comparison studies available for the general public, following the principles of EN 15804, ISO 14040 and ISO 14044, a critical review of the LCA study is required. Different to ISO requirements for comparative LCA studies TEPPFA did not install a review panel, but commissioned a single critical review. This critical review was performed by Denkstatt GmbH.